Oleopneumatic jack for all types of heavy vehicles, powered by an oleopneumatic pump, the piston retracts automatically and the descent double valve ensures a constant and controlled speed with the load, and even increases it without a load.
These valves guarantee perfect support of the load, even in the case of accidental bursting of any air or oil hose.
It is made of special materials guaranteeing its operation, quality and breaking strength even in the most extreme situations.
It complies with the MACHINERY DIRECTIVE 98/37/EC and is approved per EUROPEAN REGULATION EN 1494.
Power supply pressure: 8 > 10 bar.
Operating temperature: -20°C to +50°C.
Air consumption: 400 L / min.
Pneumatic installation pipe: Rilsan, dia. 6x4 mm.
Compatible oil: ATF Dexron IID.
3 hydropneumatic jack models are proposed to cover each type of use in HGV servicing and maintenance workshops.
Model CRH215N: Model with short body and wide head used for lifting 20 to 40 T over a height of 300 mm.
Model CRH215L: Model with long body and ultra-thin head used for lifting 20 to 40 T over a height of 300 mm.
Model CRH315L: Model with long body and wide head used for lifting 18 to 60 T over a height of 335 mm
Guarantee applied | |
---|---|
M1 | SAM Equipment and Machine Guarantee: |
Documentation | |
---|---|
PDF technical data sheet | |
Certificate of conformity |
Photos and texts not contractually binding
in France, Spain, the Netherlands
with an in-house customer service department
Du lundi au jeudi de 8h30 à 12h30 et de 13h30 à 17h30 et le vendredi de 8h30 à 12h30 et de 13h30 à 16h30
in Europe place their trust in us