DYNASAM® 4.0 communicating torque wrenches
SAM Outillage develops torque wrenches for you with the goal of zero-fault production.
This new DYNASAM® 4.0 range guarantees optimised traceability and safety for all your tightening operations. These intuitive wrenches keep human error to a minimum, offer a reliable process and easy data processing.

Wrench connected to your network
- Configuring, setting and utilisation without any latency.
- Wifi connectivity 2.4 - 5 GHz (IEEE 802.11 a/b/g/n) offers a maximum range in industrial environments.
- Easy to integrate in your network thanks to our open protocol (TCP/IP Socket).
- No worries around your exchanges thanks to the use of our security certificate (EAP-TLS).
Secure process
& traceability guaranteed
- Continuous recording and verification of your operations, results and events.
- Several measuring modes to meet all your needs: Torque, Angle, Torque + angle
- Minimised risks for the operators via a single interface for all your settings.
- The last calibration date, monitoring of the number of tightening operations and verification of your wrench when you start up your device.
Intuitive & simple to use
- Measuring independent from the position of your hand
- Visual, sound and kinesthetic indications when the operator reaches the set torque value.
- No production downtime thanks to the interchangeable 8-hour batteries.
- Unerring traceability even when changing the battery.
Reduced weight and size.
Tool and its accessories delivered in a dedicated case.
A DYNASAM® 4.0 communicating torque wrench Low torque tightening values going from 0.4 to 10 Nm

Perform precision tightening operations with torque values going from 0.4 to 10 Nm
Double indication bargraph with:- Three coloured visual indicators: tightening ongoing, tightening conform, tightening nonconform.
- Customisable user tolerance
Precision over the range: +/- 3%.
The tightening values are guaranteed by means of three indications:
- Visual indication.
- Sound indication
- Physical indication
The DYNASAM® 4.0 communicating torque wrench is supplied with a 4-point declaration of conformity in line with standard NF EN ISO 6789-1 (2017).

DYNASAM 4.0®
French know-how in
electronics,
mechanics and IT.
A DYNASAM® 4.0 communicating torque wrench High torque tightening values going from 10 to 100 Nm

Perform precision tightening operations with torque values going from 10 to 100 Nm
Double indication bargraph with:
- Three coloured visual indicators: tightening ongoing, tightening conform, tightening nonconform.
- Customisable user tolerance
- Visual indication.
- Mechanical disengagement: damped mechanical disengagement
Precision over the range: +/- 3%.
Wrench available with or without dedicated application
Wrench supplied with a 4-point calibration certificate, in line with standard NF EN ISO 6789-1 (2017).