Manual metal pressure-depression pump

The pressure and vacuum pump is ideal for performing all the bleed, inspection, watertightness, calibration operations, etc.
Max. pressure: 4 bar. Max. negative pressure: 1 bar.

The pressure and vacuum pump allows you to:
- Check the vacuum advance curve
- Check the functioning of a vacuum sensor
- Check an EGR valve
- Check the sealing of a petrol pressure regulator.
- Check the sealing of an automatic gearbox's vacuum modulator.
- Check a servo-brake's membrane.
- Bleed a brake circuit.
- Check the sealing on an injection pump's membrane.
- Check the power steering vacuum pump.
- Check a turbo's supercharging pressure.
- Check the discharge pump's functioning
- Pump supplied in a box with end-pieces and hoses.