Stepped double-edge bits

Metal working , Special drills

FEL-...

Starting from

117.00 € excl. VAT

All the references (8)

PDF product data sheet Buy

Stepped double-edge bits

Thanks to the deep helical gouging the vibrations are eliminated and the cutting performance is significantly improved. The problems of jamming and clogging with chips are eliminated. The chamfer facilitates the withdrawal of the drill bit when doing through drillings.
Surface: Ground / coated with titanium nitride.
Right-hand cutting. Tip angle: 118°. Step angle: 90°.

Sales reference	L (mm)	Weight (g)	Drilling capacity mm	diameters mm	tail diameter mm	Price excl. VAT
FEL-1 DOUBLE-BLADE STAGED DRILL 4 TO 12 MM CYCLINDRICAL SHANK	65	70	4 - 12	4-5-6-7-8-9-10-11-12	6	117,00 €
FEL-2 DOUBLE-BLADE STAGED DRILL 4 TO 20 MM CYCLINDRICAL SHANK	75	80	4 - 20	4-6-8-10-12-14-16-18-20	8	151,00 €
FEL-3 DOUBLE-BLADE STAGED DRILL 4 TO 30 MM CYCLINDRICAL SHANK	100	100	4 - 30	4-6-8-10-12-14-16-18-20-22-24-26-28-30	10	204,00 €
FEL-4 DOUBLE-BLADE STAGED DRILL 6 TO 27 MM CYCLINDRICAL SHANK	75	100	6 - 26.75	6-9-11.4-14-17.25-19-21.25-26.75	10	280,00 €
FEL-5 DOUBLE-BLADE STAGED DRILL 6 TO 32 MM CYCLINDRICAL SHANK	75	120	6 - 32	6-9-11.2-14.5-18.2-22.3-27.9-32	10	316,00 €
FEL-6 DOUBLE-BLADE STAGED DRILL 6 TO 30 MM CYCLINDRICAL SHANK	80	150	6 - 30.5	6-9-12.5-15.2-18.6-20.4-22.5-28.3-30.5	10	316,00 €
FEL-7 DOUBLE-BLADE STAGED DRILL 6 TO 37 MM CYCLINDRICAL SHANK	100	280	6 - 37	6-9-12.5-15.2-18.6-20.4-22.5-26-28.3-30.5-34-37	10	346,00 €
FEL-8 DOUBLE-BLADE STAGED DRILL 6 TO 38 MM	100	320	6 - 38	6-9-13-16-19-21-23-26-29-32-35-38	10	338,00 €