Paintless dent auto body tool slide hammer glue puller

Composition of the kit:
1 electric adhesive gun, 220V - 200°C and 8 standard adhesive melt sticks.
1 set of 9 adhesive pellets with different diameters.
1 stainless steel inertia hammer with fast attachment fitting.
1 traction-point pliers with bodywork soft protection coating to be positioned when applying the force.
1 nylon force lever and 1 solvent diffuser flask (acetone-type to be filled) for removing bonded pellets.
Supplied in a plastic storage box.
The traction-point dent-removal kit with inertia mass allows the user to repair hail-damaged bodywork that has suffered slight denting without requiring painting. Before using, clean the working area so it is clean and dry.
Then select the pellet whose diameter is closest to that of the zone to be pulled.
The user fastens the plastic pellets with the gun and the specific adhesive to the dent-removal area.
You can then attach the inertia mass or the traction pliers to this pellet using its special fitting and pull on the bodywork applying force gradually or pulling sharply. You can then remove the pellet using a conventional solvent and the nylon lever.