Digital inflator

For inflating and checking the pressure.
Digital display - High performance from low pressure to HGVs.

- Technology:
- Pressure range from 0.10 bar to 11 bar
- 0.01 bar resolution

- Utilisation temperature: -10°C to +40°C
- Easy to read thanks to the 12 mm high digits, smaller display of last digit
- Visual check of correct functioning of the digits each time pressure is applied
- Product available with different measurement units (bar, psi*, kPa*)
- Pressure gauge switches on automatically when pressure is applied (connection to the valve)
- Switches off automatically when pressure is removed or when pressure is constant for more than 10 seconds
- Battery lifetime: 10 years after manufacture in temperate surroundings (the battery cannot be replaced)
- Automatic zeroing at each inflation to ensure there is no drift in the measurements
- Display of the pressure measurements when the buttons are released
- User alerted in case of failure

- Design - Robustness:
- Tried and tested design of the Univ'Air and Eurodainu pressure inflators
- Air inlet tube F G 1/4
- Elastomer protection encasing the measurement system.
- Reinforced sealing by installation of clip-on slide
- Very great measurement precision and level of precision maintained in case of impact on the device
- Robustness: top-of-the-range thermoplastic components
- Anti-pinching handle
- Corrosion-resistant thanks to internal mechanism made of appropriate materials
- Air filtering in the indicator mechanism by stainless steel and nickel-silver micro-porous filter
- Device resistant to accidental 15 bar overpressure

Ask to be called back

by one of our staff

Call me back

 
Designation

DIGITAL INFLATOR 6.3 BAR CONNECTION 1/4''

Sales reference

1894

L (mm)

100

Weight (g)

820

l (mm)

100

h (mm)

240

C mm

6,3

C mm

1/4"

Inner pipe diameter mm

1

Guarantee

M1 | SAM Equipment and Machine Guarantee:

Références non commercialisées
Article 1894 is no longer available for sale. Please contact our customer service dept.
Guarantee applied

M1 | SAM Equipment and Machine Guarantee:
Guarantee for a limited period, covering technical tools, devices and machines used under normal conditions. The length is given by the number after the letter M: 1 to 5 years

Find out more
<b>M1</b> | SAM Equipment and Machine Guarantee:
 

Standards & Directives

Standards / Directives
86/217/CE
NFR 63-302
 

- Products in the same section Blowguns

Photos and texts not contractually binding

European company

in France, Spain, the Netherlands

Advice from a pro

with an in-house customer service department

+33 (0)4 77 92 13 00

Du lundi au jeudi de 8h30 à 12h30 et de 13h30 à 17h30 et le vendredi de 8h30 à 12h30 et de 13h30 à 16h30

3,000 distributors

in Europe place their trust in us