Brake fluid tester with boiling point

Powered by the vehicle's battery (12V).
Precise check of the brake fluid's wet boiling point in °C and °F.
DOT3/4/5-compatible.
No adjustments to be made by the user, no selection of the fluid.
Just one control button. Very simple to use in the garage.
Clear indication of the recommended boiling T° for DOT 3/4/5 on the screen. Self-protected system: If immersion in the fluid is not sufficiently deep, it switches to safety mode.
Smart system: If the vehicle's battery is too weak or over-charged, it will notify the user. If there is a defective internal component, it will also notify the user.
Removable electrical heater part / available as spare part.
Can be cleaned with clear water: used to test the boiling T° of water (100°C) to check the device's precision.
EC-approved.
One test = 30 second.
12V max. = no 220V-related risks.

Used to check the condition of the brake fluid (therefore the humidity present) by boiling.