Vibroshock : tool for removing and loosening nuts, spark plug clamping screws

The Vibroshock is the ideal tool for unblocking seized screws, nuts or glow plugs without breaking them.
Used with a pneumatic hammer (not included).
Patented product.

APPLICATIONS:
Brake screws.
Exhaust screws.
Rounded nuts.
Glow plugs, Injector clamp.
...

The kit contains: A vibration pin with 3/8" drive square.
Articulated handle.
Seven 3/8" impact sockets with shoulder (dimensions 8, 9, 10, 11, 13, 14 mm).


The purpose of the Vibroshock is to avoid any breakage owing to excessive torque, or to torque being applied too quickly. Its aim is also to avoid any breakage owing to excessive torque or an impact. This is what happens in general when you use an impact wrench on small-diameter screws, bolts and threaded assemblies.
The Vibroshock creates an axial vibration which brakes the "seizing between the male and female threads" by simultaneously applying a controlled torque to loosen the blocked assembly, which makes it possible to avoid any risk of breakage.

The Vibroshock compared with an impact wrench:
The Vibroshock and impact wrenches have two completely different operating modes:
-Impact wrenches apply rotation impacts on the whole mechanical assembly.
-The Vibroshock generates an axial vibration and a controlled torque.
This difference is very important when loosening a seized assembly: on the one hand, impact wrenches simply apply impacts on the rotation (with the risk of breakage) and on the other hand, the Vibroshock will, thanks to its vibration, release the play between the threads, which will make it possible to unscrew the seized assembly without any risk of breakage. The vibration will also allow oil to penetrate into the assembly. For example, is you use an impact wrench on an 8mm glow plug it will not take any longer than 2 sec. for the plug to break in the cylinder head. The Vibroshock makes it possible to very easily and effortlessly remove the plug.