Mini angle-grinder, 115° - 6 mm
PRACTICAL
Its head angled at 115° ensures better visibility for certain jobs and better access to conical shapes. The angle has been calculated so that the force cannot be offset when pressing on the part being ground.
ROBUST
The machining of the 115° steel head is done in a single piece for greater strength.
Mini-grinder with its head angled at 115° is intended for general maintenance applications and places that are difficult to access.
Very good weight/speed ratio.
Composite casing with comfortable sheath.
Silent ductable rear exhaust.
Safety lever.
Variable speed control placed on the top.
| Designation | ANGLE MINI-GRINDER 115°-6 MM |
|---|---|
| Sales reference | 1639GP |
| L (mm) | 172 |
| Weight (g) | 850 |
| l (mm) | 63 |
| h (mm) | 40 |
| Power (W) | 170 |
| Rotation speed (rpm) | 22000 |
| Noise level (dBa) | 3 |
| C mm | 93 |
| C min mm | 6,3 |
| C mm | 200 |
| C mm | 1/4" |
| Guarantee | 6 mm |
| Price excl. VAT | M1 | SAM Equipment and Machine Guarantee: |
| Guarantee applied | |
|---|---|
M1 | SAM Equipment and Machine Guarantee: |  |
Article 1639GP can take the following accessories...
| Documentation | |
|---|---|
| PDF technical data sheet | |
| Certificate of conformity |
| Pictures | |
|---|---|
 | HD photo No1 |
- Products in the same section Grinders
Photos and texts not contractually binding
European company
in France, Spain, the Netherlands
Advice from a pro
with an in-house customer service department
+33 (0)4 77 92 13 00
Du lundi au jeudi de 8h30 à 12h30 et de 13h30 à 17h30 et le vendredi de 8h30 à 12h30 et de 13h30 à 16h30
3,000 distributors
in Europe place their trust in us