PRECISION GUARANTEED: +/- 4% with the SAM torque multipliers.
UTILISATION SAFETY: replaces extensions and handmade long levers.
IMPOSSIBLE TO OVERSHOOT THE TORQUE VALUE: thanks to the torque limiting mechanism.
COMPACT: enables use in confined spaces.
SAFETY: supplied with a fulcrum system for safety.
Ideal for tightening and loosening very high torque values.
Constant multiplication factor of x5.
Handy thanks to its small size allowing it to be used in places with not much clearance.
Supplied with a flat support point.
Supplied in a box to facilitate transport.
RECOMMENDATIONS FOR YOUR SAFETY
Given the forces generated, the use of torque multipliers requires simple, but vital, safety measures:
- To be sure of controlling the output force always use a torque wrench. Never use an impact wrench type tool.
- Check that the support point can withstand the output torque value.- Preferably use "impact" sockets locked with a clip and pin.
- Never attempt to exceed the multiplier's indicated maximum value. You would risk breaking the pinions, with all the dangers caused by the restitution force.
Designation | TORQUE MULTIPLIER X5 DIAMETER 72 MM |
---|---|
Sales reference | ML-150 |
Weight (kg) | 6.46 |
D (mm) | 180 |
A (mm) | 108 |
Maximum output torque Nm | 1500 |
Maximum output torque Ft.lb | 1110 |
C min mm | - |
C max mm | - |
output square " | 1" |
input square " | 1/2" |
Maximum input torque Nm | 300 |
B (mm) | 126 |
Guarantee | M1 | SAM Equipment and Machine Guarantee: |
Guarantee applied | |
---|---|
M1 | SAM Equipment and Machine Guarantee: |
Standards / Directives | |
---|---|
NF ISO 1174-1 |
Documentation | |
---|---|
PDF technical data sheet |
Pictures | |
---|---|
HD photo No1 | |
HD photo No2 |
Photos and texts not contractually binding
in France, Spain, the Netherlands
with an in-house customer service department
Du lundi au jeudi de 8h30 à 12h30 et de 13h30 à 17h30 et le vendredi de 8h30 à 12h30 et de 13h30 à 16h30
in Europe place their trust in us