Brake circuit bleeder 3l

3L brake bleeder
This bleeder will allow you to drain your brake fluid easily on your own.
- Fill the cylinder with new brake fluid
- Screw on the bleeder cap instead of the original cap and clip on the hose's coupling
- Pressurise the cylinder respecting the maximum indicated in the instructions. The integrated pressure gauge will give you perfect control over the system's pressure.
- Open the car's bleeders. The new brake fluid will be sent directly into your brake circuit while driving out the old fluid.

The 3L automatic brake bleeder is also suitable for bleeding your car's hydraulic clutch systems.

Internal diameter of the cap: 44mm
For perfect bleeding, it is recommended as a priority to open the bleed valves that are furthest from the master cylinder and come back to the ones that are closest.